- Joined
- Aug 11, 2007
- Messages
- 529
- Points
- 3,101
- Age
- 34
- City
- ohio
- Vehicle Year
- 1987
- Transmission
- Manual
How thick is the plate that you used on that? Looks beefy.
Lifting my 97
- Thread starter metalmacguyver
- Start date
- Joined
- Sep 4, 2007
- Messages
- 3,814
- Points
- 3,101
- Age
- 38
- Vehicle Year
- 1997, 1994
- Transmission
- Manual
1/4" for most of the pieces and 5/16 for another because it was what I had.
- Joined
- Sep 4, 2007
- Messages
- 3,814
- Points
- 3,101
- Age
- 38
- Vehicle Year
- 1997, 1994
- Transmission
- Manual
Made some more progress on the truck.
I pulled the drop bracket to beef it up so that It wouldnt crack like many super lift brackets do.
This is what I found........
I heated the bracket with the torch to release the stress in it, ground it out, welded where the crack was, and gussetted it.
The frame plating finished.
Cleaning it off before painting, I used brake cleaner.....
It was so cold that the brake cleaner couldnt evaporate.
Primed and painted.
And then I started on mounting the PS pump.
I pulled the drop bracket to beef it up so that It wouldnt crack like many super lift brackets do.
This is what I found........
I heated the bracket with the torch to release the stress in it, ground it out, welded where the crack was, and gussetted it.
The frame plating finished.
Cleaning it off before painting, I used brake cleaner.....
It was so cold that the brake cleaner couldnt evaporate.
Primed and painted.
And then I started on mounting the PS pump.
- Joined
- Aug 6, 2007
- Messages
- 1,552
- Points
- 3,101
- Age
- 38
- City
- Plattsburgh, NY
- Vehicle Year
- 1995
1999
- Transmission
- Manual
trucks coming along good tim.. looks like we both have been SUPER busy this weekend!
- Joined
- Sep 4, 2007
- Messages
- 3,814
- Points
- 3,101
- Age
- 38
- Vehicle Year
- 1997, 1994
- Transmission
- Manual
Yeah man, get some pics of your shit posted!
i like the off road cart
- Joined
- Sep 4, 2007
- Messages
- 3,814
- Points
- 3,101
- Age
- 38
- Vehicle Year
- 1997, 1994
- Transmission
- Manual
Thanks. The dinky little 1.5" casters it came with wouldnt cut it moving around on the gravel/dirt/snow/ice that I work on.
- Joined
- Sep 4, 2007
- Messages
- 3,814
- Points
- 3,101
- Age
- 38
- Vehicle Year
- 1997, 1994
- Transmission
- Manual
Got some more work done today/tonight.
I found a pulley that would work on my pump.
However, I ran into a problem with the way that I mounted the pump. I have a half inch spacer that makes it a very strong mount setup. I figured this would be offset by the extra 1/2" of shaft length that I had.
Well the pulley center is offset by a half inch........
When I install the pulley, it interferes with the bolts and sits too close to the pump. This pic is with the pulley not installed, just held up to the end of the pump shaft.
So I decided to "adjust" the pulley.
And some gusseting I added to my tranny/rad arm crossmember.
Then I decided to take apart the pump I got from the van just to see how easily the pump reservoir comes off.
The answer was "pretty easy".
And then I painted some shit.
I found a pulley that would work on my pump.
However, I ran into a problem with the way that I mounted the pump. I have a half inch spacer that makes it a very strong mount setup. I figured this would be offset by the extra 1/2" of shaft length that I had.
Well the pulley center is offset by a half inch........
When I install the pulley, it interferes with the bolts and sits too close to the pump. This pic is with the pulley not installed, just held up to the end of the pump shaft.
So I decided to "adjust" the pulley.
And some gusseting I added to my tranny/rad arm crossmember.
Then I decided to take apart the pump I got from the van just to see how easily the pump reservoir comes off.
The answer was "pretty easy".
And then I painted some shit.
- Joined
- Aug 6, 2007
- Messages
- 1,328
- Points
- 3,101
- Age
- 40
- City
- Western Mass
- Vehicle Year
- 97
- Transmission
- Automatic
baby blue is a good color for a guy like you
- Joined
- Aug 19, 2007
- Messages
- 6,656
- Points
- 3,101
- Age
- 37
- City
- Everett, WA
- Vehicle Year
- 2012
- Transmission
- Automatic
Looks more like Ford Blue to me...
- Joined
- Sep 4, 2007
- Messages
- 3,814
- Points
- 3,101
- Age
- 38
- Vehicle Year
- 1997, 1994
- Transmission
- Manual
- Joined
- Aug 6, 2007
- Messages
- 1,328
- Points
- 3,101
- Age
- 40
- City
- Western Mass
- Vehicle Year
- 97
- Transmission
- Automatic
hey your sig says you're locked in the front 
- Joined
- Aug 14, 2007
- Messages
- 7,961
- Points
- 3,101
- City
- UT
- Vehicle Year
- 1989
- Engine
- 4.0 V6
- Transmission
- Manual
- Total Lift
- 5
- Tire Size
- 33
Ha ha so you have this drity motor with a bright blue pulley!
You gonna paint the rest of it?
You gonna paint the rest of it?
- Joined
- Sep 4, 2007
- Messages
- 3,814
- Points
- 3,101
- Age
- 38
- Vehicle Year
- 1997, 1994
- Transmission
- Manual
Nawwwww, I only paint the stuff I care about. 
(The hydroboost unit is also painted as the power steering pump will be.)
If I were swapping in a 4.0 SOHC, I would take the time to paint the motor.
(The hydroboost unit is also painted as the power steering pump will be.)
If I were swapping in a 4.0 SOHC, I would take the time to paint the motor.
Sponsored Ad
TRS Events & Gatherings
Latest posts
-
-
-
-
-
-
95 Ranger instrument cluster backlight question.- Latest: RobWigglezz
-
-
Recently Featured
TRS Latest Video
Official TRS Merchandise
Follow TRS On Instagram
