• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

lift


For the D-28 front axle, NAPA Item#: NCP2643952 is the 0*-3 1/4* adjustable alignment bushing. Not sure if it's for a single or a pair though.

For the D-35 front axle, NAPA Item#: NCP2643950 is the 0*-4* adjustable alignment bushing. Supposedly for a pair, but NAPA's site doesn't say anything about that.
 
My ranger has a 4" rc on 31x10.5 duratracs. 3.73's, 4.0 and m50d-r1. Judging by the speed things the stateies put on the highway, my speedo is 1mph slow. When I get moving hit about 65 in 3rd around 2.5k rpm, shift to 4th and I can hit 75-80. It'll hold that in 5th going 1.7k rpm if you don't hit a steep hill. However, 75-80 is THE FASTEST my truck will go.
 
mines a 92 with a 4.0 with the 5 speed and i ve got 3.73s and 32s on a 4 in. rc lift and i can get up to bout 75 and hold it there and if urs is a manual you have to buy a extension kit for bout 25 bucks it would be cheaper to just peice the lift together that way you can buy it a little at a time and instal it later when u have all the parts
 
fritz and bcw i have the 2.8 not the 4.0 so u guys have more power than what i have
 
Should just take you longer to get there :p I wouldn't worry about it.

The only thing RC didn't have in their kit that I needed was a cotter pin for the drag link, and brake lines. Didn't have a pin laying around so I used a nail to get the the shop for an alignment. Got the lines from Duff.

Why do Broncos' need sway bar drops? Excuse that I've never been under a BII before. I thought the ranger might need one, but when I got it all back together, the sway bar actually sits at closer to a 90* from the link so it seems like I get more travel (if that was the limit) It was extended before to more of a 110* or so.
 
i decied not to get a lift right away cause i wanna do it right and sas and lift drop a 4.0 in and all that at the same time and with to many bills and not enough money it wont happen soon since i will have to get a beater car for the down time.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top