Identifying eec-v computer

[droptopls1]

I went to the wrecking yard today and pulled an eec-v out of a 5spd 2.3 ranger.
It was already unbolted so I want to double check the part number to make sure it will work when swapping the ar44e for the manual trans in my 96.

The big number on top is ARE1 just below and left of that it says ( ML2-212)
below that number it says (F57F-12A650-BYB)

To the right and below the barcode it says( *DCNAR05QVJYJ* )
And finally below that number it says ( G NPF 5J252)

Hopefully somebody can tell me if I hace the right computer to make this truck a 5spd!
Thank You!

 

[droptopls1]

Answered my own question Check this out!

This place sells ECM's so they have all the part numbers listed and what they go to. Could be real usefull if you have an ecm and don't know what it goes to.
http://autocomputersupply.com/index.asp?PageAction=VIEWPROD&ProdID=43