• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

How to tell the difference in a 4r44e and 5r55e ?


jarfly

15+ Year Member

Joined
Oct 7, 2007
Messages
729
Points
3,101
Age
34
Vehicle Year
1987
Transmission
Manual
Can someone tell me how to tell the difference in a 4r55e and a 5r55e while still in the truck ? where are the #'s located ?
The Mechanic thinks my 98 ranger has had the tranny changed from the 4r55e to the 5r55e.
He pulled a code that shows it is missing 5th gear.
overdrive light flashes and shifts hard from 1st to 2nd.
any input appreciated.
 
Last edited:
The 4R44E only comes behind 2.3 4cyl and 3.0 V6 engines. The 5R55E only comes behind the 4.0 V6.

What engine do you have?
 
we found the id tag on trans it is a 5r55e. the code on the door calls that trans so it has the correct one. the code says missing 5th gear. shifts hard from 1st to 2nd any ideas what the problem is thanks
 
Last edited:
Can be valvebody gasket, shift solenoids to name a few common problems. If its missing 5th, I've seen the OD sprag take a dump before too.

Matt
 
The reason its shifting hard is due to the code, the code puts the trans into high line pressure as a way to help prevent its self from failure. No 5th could be a fuse a wiring problem or solenoid or hard parts damage internally or as said in post above.
 

Sponsored Ad


Sponsored Ad

Special Events

Events TRS Was At This Year

TRS Events

Member & Vendor Upgrades

Become a Supporting Member:

Or a Supporting Vendor:

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top