-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
how to chang shocks 2003 ford ranger
- Thread starter sal 70471
- Start date
Profile says 2003 edge...
Get front of truck on jackstands, unbolt top shock nut, unbolt lower shock bolts(under control arm), slide shock out of truck, slide new one in, bolt bottom first, then top. Done up front.
Rear: remove the bolt from the axle, pop shock out of axle mount, unbolt nut off the top mount, wiggle shock off. Install is reverse.
Get front of truck on jackstands, unbolt top shock nut, unbolt lower shock bolts(under control arm), slide shock out of truck, slide new one in, bolt bottom first, then top. Done up front.
Rear: remove the bolt from the axle, pop shock out of axle mount, unbolt nut off the top mount, wiggle shock off. Install is reverse.
Similar threads
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Latest posts
-
-
2.3L ('83-'97) High intake temps (radiator fan shroud?)- Latest: scotts90ranger
-
-
-
-
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
