homemade pivot brackets

[offroad junky]

would someone be nice and measur there 4-6'' drop pivot brackets(both sides)b/c 165$ is to much for new ones. also the drop torsionbars would would be great thanks in avance!
btw if someone has already done this any info would be great thanks

 

[JohnnyU]

Look HERE

 

[4x4junkie]

My suggestion would be to look for some used ones (or a used lift). Those brackets are not exactly easy to copy and have it be sturdy (you could probably extend the stock ones 3-4", although you WILL need to reinforce them to handle the added leverage on them).

 

[offroad junky]

thanks for the info. iwas only planning on 4", the reason i ask is b/c the truck is on its last leg. but is still my trail rig till the next one is done.(i got bigger tires so need to go bigger)

 

[95XL]

Try searching a little more, same question was asked about 2 weeks ago.

http://www.therangerstation.com/forums/showthread.php?t=15367

 

[offroad junky]

i'm not trying to "make" new ones just exstend the orginals. another ? does the kit drop the tranny mount? thanks

 

[metalmacguyver]

The only kits that do anything to the tranny mount are the ones that have extended radius arms. It replaces the crossmember but keeps the tranny in its original location.

 

[offroad junky]

thanks for the info, this is a great site for info!