home made body lift

[truckguy]

All i need is about 1-1.5 inches of lift so i was thinking i could drill a hole in a bunch of hockey pucks and stick them between the bushings and the body. Would this work? If so is there anything else i would have to do?
thanks,
morgan

 

[RangerFan87]

I dont know man that just sounds dangerous. The right kit aint that much and its better to pay to do it right the first time.

 

[pwrranger88]

do it right the first time so you don't need to filx stuff down the road
heres a link to one inch blocks
https://www.shopatron.com/product/part_number=BB01/706.2.2477.0.0.0.0
and i'm not to sure on the bolt sizes just use grade 8 here is the bolt sizes for the b2
but the ranger ones are
(2) 12x1.75x90mm
(2) 12x1.75x110mm
(6) 12x1.75x130mm
(2) 12x1.75x150mm
its also a good time to replace worn out cab bushings the cheapest replacement ones i found are prothane ones from summitracing.com