help with slave cyl!

[powerwagon]

well hello, i had to remove my m50d trany from my2.3 ranger to replace 1st and 2nd gate any ways.... the damn spring and throw out bering fell of the slave cyl! is this normal or did i brake it? can io pop it all back to gether like that? pleas tell me somthing some one i just wana drive my ranger!

 

[stopracing]

a friend of mine pushed the clutch in and blew mine apart, i put it back together and works great

 

[powerwagon]

ok good, i was looking at the new ones online and i dident know if it hade to remain one peice. ill find out and if it has to come back of o well thes littel tranys ant crap compared to a 727 or np435

 

[Hardwareman]

It should still be good. I would check to make sure the snap ring that holds it onto the slave is still good though.......BUT........it's a lot safer to just replace it all since you have it apart.

Don't ask me how I know........hahaha





Allen

 

[kossdust]

Yeah should be ok but I would replace it while I am there. You don't want to go back in a few months for it.