help with buying cluch

[powerwagon]

my slave cylender is pissin in my 88 2.3 with mazda tranny...so i will be tering it down soone to replace can any one tell me about real good deal? can i upgrade to biger clutch too? im wantin a good clutch not junk.

is this worth a shit?
http://www.clutchcityonline.com/products/07-054S.shtml

 

[177CIOfPureLove]

That's a really good deal man! I know those parts cost a lot more when I bought them. Make sure to resurface or replace your flywheel, I regret not doing mine. I don't think you can get a bigger clutch for your 2.3, even the later 2.5L has the same size flywheel. It should hold everything you need.

 

[LittleHorse]

that is a good deal. You'll find a lot of clutch kits that cost equal or more than that but don't include the slave.

 

[powerwagon]

so i couldent get a clutch for a bigger 2.9 or bigger rbv?

 

[AllanD]

a performance clutch like a Centerforce II, NOT, NOT, NOT the "dual friction"
works real well on a 2.3 engine.

It's not bigger, but it grips better.

the 2.9 clutch is more or less the same clutch as that on a 2.3.

which is WHY it's a problem on the 2.9

AD