Got a new trans. no NSS....

[Zephys69]

So my project is coming along. i pulled the motor and trans for a rebuild. Took the trans to the shop, they said it was scrap. So i found a new one. But there is no NSS on the new one... what should i do, jump the wires? Leave that plug tied up? Swap out the shifter covers on the trans?

Here's the tech specs
94 Ranger 2wd 4.0
It's the Mazda M50D-R1
New trans out of the same from what the salvage yard told me.

 

[scotts90ranger]

I have a '89 transmission in my Ranger, tranny has a NSS, My Ranger is a '90 that didn't have a NSS from the factory... strange that they went back to using the NSS a few years later... If it won't start without it, jump the pins, if it doesn't change anything ignore it as you'll still have the clutch safety...

 

[adsm08]

Just wire the two wires from that plug together. That is probably what I will be doing when I swap the 4.0 in.

Postin' from teh Galaxy