front u-joint part numbers upgrade

[badmts]

Well my lead tech took off for London so that pushed back my front locker install long enough to mess up a wheel bearing.So now my/his to do list is ,Spartan locker for front ,front wheel bearings and while he is at it ALL front u-joints.My question involves P/N for upgrade .Now my limited research this evening has shown me the SPICER 760X I believe,I want to replace all the ones in the front (d35 94 b4000) ,I think there are 2 on the right,1 on the left and 1 or 2 on front driveline? What I am looking for is part numbers and fitment information. I am looking for an upgrade in the same vein as the hub deal(stronger jeep hubs were direct replacement for stock manual hubs) not some expensive racing stuff ,just better than stock and will go right in without any extra fabrication-thanks!

 

[Sasquatch_Ryda]

Spicer 5-760X is what you want.

Drive shaft U joints are 1310 series.

Drive shaft: http://www.justdifferentials.com/index.php?main_page=product_info&cPath=414&products_id=2139

Axle U joints: http://www.justdifferentials.com/index.php?main_page=product_info&cPath=414&products_id=1699

 

[badmts]

okay we got dana spicer 5-760x -this is GREAT info !now how many do i need to buy if we are doing the D35 frt drive axle ? 3,4,5...?

 

[Sasquatch_Ryda]

You would need 3 of them to replace all the axle U joints as there are 3 u joints in the front axle shafts.

The drive shaft u joints are different...

 

[badmts]

thanks -ordered from drivelineamerica.com (3) 5-760x's to me $65.00 total. I will rate speed and service.