Front Susp. Replacement

[jrboatin]

I have a 1999 Scab 4x4 , and I a get some clunks from the front.
Looking for the top places to get real good parts from.

Looking to replace left upper arm with zerk fit, lower ball joints with zerk Maybe left half shaft and any other front end parts you all may add....


If I do left upper arm should I do right upper as well ?

Also pads rotors and maybe calipers....


Thanks All

 

[Fx4wannabe01]

http://rockauto.com/

Hands down, the cheapest place to get parts.

On your joints, I'd go Moog. All Moog upper arms have replaceable ball joints, when ends up being WAY cheaper in the long run of the truck's life. I got moog uppers, moog lowers, and tie rod ends for about $300 shipped....compare that to the quote I got locally from a couple different parts houses($550), I saved a hell of a lot of money going to RockAuto.com. They have zirk fittings.

I'd go ahead and do your outer tie rods while you're at it. About $20 per side, plus you've gotta get an alignment anyway with the new BJ's.