Ford Ranger window size needed 1993 1997

[Dubster]

Hello everyone,

I am planning to convert a Willpak window louver to a custom European truck.

I live in Europe, no louvres can be bought for our cars over here. I already did a lot of reseach but hope this forum can help.

Transport from USA to EU is expensive, so i need to be sure the louver from Ranger is larger compared to the window of my car (so i can trim/reshape).

This louver:

Willpak® 6037 - Classic Design Textured Surface ABS Plastic Rear Window Louver

Classic Design Rear Window Louver - Part Number 6037 by Willpak. Available in Exterior Department at www.carid.com

www.carid.com

Will fit the 1993 to 1997 Ranger. If i am correct, width is about 49" (at largest point down the window) hight 14" in the middle.

I hope someone can help me out, verifying this sizes on car so i am 100% sure that i am buying the right one. Thanks in advance.

 

[97RangerXLT]

is your Ranger a supercab version or regular cab? from the description I think your window cover is for the regular cab. the rear windows in the supercab are larger than the regular cab version from 93-97. after 97, all of the Rangers got the same window as the supercab. Louvers are pretty much hard to find here as well, that style kind of faded away in the mid 80s, so good luck!

Welcome to TRS, btw

AJ

 

[Dubster]

The willpack louver (see link in my first post, not sure if everyone can click on it due to security reasons) claims to be for a 1993 to 1997 Ranger, super cab is not mentioned so i hope this is for the regular version.

the window of a regular cab should be about 49" (underside) and 14" high in the middle.

If someone has this car, it would be great if he/she can measure so I am sure I can adapt this part to my car

 

[rumblecloud]

You may have already done this, but I just went to the link you provided and chatted with a rep from CardiD.
Here is a copy of our chat:

Ben Richards
09:37 AM
Thank you for holding.
Please use this link, I have added my personal Discount and Free shipping:

www.carid.com/cart.php?rst_cart=299368708B81602806135FB8326FD5E7&utm_source=email&utm_medium=lead&utm_campaign=call

Ben Richards

09:37 AM
It will fit Regular Cab with the Non-Sliding Window
------------------------------------------------------
With that being said, I would still wait for someone with a 93 RC to post their dimensions for you. Like you said, shipping is expensive.

Welcome to TRS!

 

[Dubster]

Hi Ben, thanks for your post. I mailed to the sales dep and they couldn't give me dimentions or spex. So perhaps it was another person on the chat. Helps me forward! If someone has a regular cab, that can measure width and hight, it would be awesome

 

[alwaysFlOoReD]

93 Ranger Xlt
First couple pics is from outside rubber. Next couple is from inside. Ehh, they didnt load up in proper order but you should be able to figure it out.

 

[rumblecloud]

What?? No metric ruler?

 

[Dubster]

alwaysFlOoReD you rock, big thank you !!!

will buy this louver in the next hour and keep you guys updated from the mods made to it to fit other type of car (if someone is interested of course)