- Joined
- May 6, 2009
- Messages
- 12
- Points
- 3,101
- City
- Phenix City Al
- Vehicle Year
- 00
- Transmission
- Automatic
i have a question concerning the wiring on the fog light switch from an 07 Mazda b4000. i bought the bezel today to replace the one in my 00 ranger.
now i want to start out saying i am not trying to wire up foglights or anything like that, but i was wondering what the four wires go to?
i want to use the switch to turn on 2 very small neon lights that going by my stereo.
i would assume one pin is ground, one is hot in, one is hot out, and one is hot to backlight on switch. i just need help figuring out whats what since i dont have the foglights nor the wiring to test it. thanks in advance!
now i want to start out saying i am not trying to wire up foglights or anything like that, but i was wondering what the four wires go to?
i want to use the switch to turn on 2 very small neon lights that going by my stereo.
i would assume one pin is ground, one is hot in, one is hot out, and one is hot to backlight on switch. i just need help figuring out whats what since i dont have the foglights nor the wiring to test it. thanks in advance!
