Family Wheeler

[compleckz]

i had a similar failure.. my speedo stopped working so i pulled the vss, both the drive and driven gears were toast.. the case broke where the clip goes to hold the bearing in.. lame

http://ranger.spedmonkey.com/tcase/tcase38-sm.jpg
http://ranger.spedmonkey.com/tcase/tcase42-sm.jpg
http://ranger.spedmonkey.com/tcase/tcase39-sm.jpg

 

[CheapThrillB2]

yep it blows sense it pretty much wrecks the tcase.

good thing i had a spare laying around. So it was a quick replacement and up and running again. But i was playing with the truck tonite in a sand pit and it doesn't like to spin the boggers very easily

 

[CheapThrillB2]

 

[CheapThrillB2]

Finally got around to doing something with my joke of a front bumper :teehee: The chunk of "C" channel has been with me a long time and has been on every vehicle i have wheeled ( its seen like 5 different trail rigs )

Still gotta finish it, but its good enough for now.....

 

[compleckz]

nice, looks good

 

[CheapThrillB2]

 

[Rinny650]

Where'd the front right bogger go??

 

[CheapThrillB2]

It had a rope plug in it that worked itself loose while it was aired down to 3psi so i had to change it out with the spare

 

[Rinny650]

Gotcha. Quick question. Where does everyone get the shackle attachment points for the bumpers? Make them?

 

[CheapThrillB2]

yes, i made my own

 

[Rinny650]

Do you have any soecs on it? Is it just a U shaped piece with a hole in it? How thick is it? Is it one thick plate or is a few thinner pieces welded together?

 

[CheapThrillB2]

It was four peices of 1/4" i had water jetted that i welded together.

Or you can buy the stuff here
http://www.ruffstuffspecialties.com....html?osCsid=1ea0ab1588af289d5d0a67c6525b2c49

 

[Rinny650]

Okay maybe Im a total idiot but I couldnt find them on ruffstuff's site. So each one is an inch thick?

 

[CheapThrillB2]

I guess i am confused as to what your asking for

I thought you wanted the brackets to attach the shackle to the bumper

http://www.ruffstuffspecialties.com....html?osCsid=1ea0ab1588af289d5d0a67c6525b2c49

my brackets i built look exactly like these

 

[Kyle M.]

I think he is talking about the D ring mounts on the bumper.