EGR flow issues

[fish]

My '95 3.OL 5spd. shows an egr flow issue. Any experience or ideas on rectifying the situation here? The plugs burn clean, starts perfect, but runs rough and gets lousy fuel mileage. Thanks for the input. With the help of those on this site I was able to do a clutch job on my ranger (4x4, yea what a job) that works PERFECT! Thanks guys!

 

[Wicked_Sludge]

is the code for excess or insufficient flow?

most egr codes are caused by a faulty DPFE sensor, its a common failure item.

before replacing the DPFE, i would pull the EGR valve off and check the EGR tube and intake manifold passages for excess carbon buildup.

 

[betomonroy]

And eventhen... clean it.