ebay budget boost


you will need an alignment, and 2" of spacers may make the front end unalignable. check out the tech library for some cheap lift suggestions. i would do about 1-1/2" of lift from some washers in the front, and do some lift shackles in the rear.
 
as long as the tires sit somewhat straight i dont care. I was more thinking about the spacers are they ok quality?
 
I've had 2 sets of short add-a-leafs and both broke. That short leaf recurves the existing spring pack--then snaps in half eventually.

If those are 2" thick, they will add 3" to the TTB. That may not be alignable, or may require $50 worth of camber bushings.

I would do a 3" body lift and cut the fenders. You could get 35s on if you wanted and not screw up your suspension.
 
I don't like those because the spacers are not metal.

I would use the Factory Spacers, or stack some washers under the coil perches before using those (the washers will let you fine-tune the height as well).

For the rear, get the Chevy shackles for 1.5-2" lift (BellTech 6400).
 

Sponsored Ad

TRS Events & Gatherings

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram


Product Suggestions

Back
Top