Easy 2in. suspension?

[broncointhemaking]

I am looking for an easy cheap way to do a 2in. suspension lift on my 1986 Bronco 2 any Ideas. Also cheap is good.

 

[MudSlutII]

tech library

 

[mjonesjr]

I have a set of 2" coil spacers I will sell you for $25 + shipping.

 

[BlackBII]

http://www.therangerstation.com/Magazine/Summer2003/LiftingOnABudget.htm

 

[NapalmMan67]

For cheap, go to the hardware store and pick up some washers. I used 8 per side (stacked height of 1 1/4") on my '87 B2 for a cheap lift.

Washers measure out at 3" diam. with a 1 1/4" hole, they worked great. I think total was about $7.


.

 

[89REDRANGER]

For cheap, go to the hardware store and pick up some washers. I used 8 per side (stacked height of 1 1/4") on my '87 B2 for a cheap lift.

Washers measure out at 3" diam. with a 1 1/4" hole, they worked great. I think total was about $7.


.

Exactly what I did on my old Ranger. Worked pretty sweet. I'd recommend welding the washers together though to eliminate some of the squeaks I got from the washers sliding against each other.