Drop springs for my '02

[racer190]

What drop springs can I use to lower the front of my truck, and still be able to have it aligned to factory specs using stock upper and lower control arms? Is a 3" drop spring too much? How about 2" drop? Any brand reccomendations that give the best ride quality? I am going to do the shackle flip to lower the rear down. Gonna have to get some wheels and tires for it then of course! Here is the truck that im working on-

 

[Fx4wannabe01]

If you can find them, get Roush 2" front springs. If you go 3", I believe Belltech makes a 3" for 98+ rangers. But you will definately have to get cam bolts to get the alignment correct. Look for 3 degree cam bolt kits.

**i believe there's a set of 2" Roush springs for sale over at Ranger-forums right now...

 

[slammedxonair]

DJM 2" coils or belltech 3" coils or save up and get the DJM 4/5 kit.

 

[racer190]

If I did the 2" drop in the front, and shackle flip in the rear, it should lower my truck down and still give it a little bit of a rake shouldnt it? How much will the shackle flip lower the rear?

 

[Casper98]

2" with just a shackle flip. Save and go 4/5, trust me I started at 2/3 and a monthe later I was at 4/5