Does anyone know were i can get one of these front susp bolts??

[geck0]

I'm doin a front lift and I messed up one of mine and need another one.

halp!

 

[geck0]

btw its huge. its the bolt that ties the front spring the the radius arms/ or whatever they are called its like 4 inches long

 

[59bisquik]

Thats gonna be either a dealer or wrecking yard item.

 

[lethal-threat-b288]

^^^+2

 

[88_Eddie]

Thats gonna be either a dealer or wrecking yard item.

negatory on that.....well, not just there

$13 + shipping at the graveyard
http://broncograveyard.com/bronco/i-93225-oem-lower-coil-spring-stud-each.html



that one looks fine though, why do you need a new one?

 

[geck0]

negatory on that.....well, not just there

$13 + shipping at the graveyard
http://broncograveyard.com/bronco/i-93225-oem-lower-coil-spring-stud-each.html



that one looks fine though, why do you need a new one?

thats the good one, the bad one the smaller threaded side is stripped (due to a loose vise and 1/2" impact



I was hoping more along the lines of someone had a scrap b2 with the suspension apart.

 

[88_Eddie]

thats the good one, the bad one the smaller threaded side is stripped (due to a loose vise and 1/2" impact



I was hoping more along the lines of someone had a scrap b2 with the suspension apart.

gotcha, yeah i stripped one of mine on my d35 that i'm putting in my b2. if you heat them up and then they'll come right out. i learned that one the hard way.

i'll be swapping out my d28 in the next couple weeks if you can wait. as far as i know, they are the same thing. i'm planning to use one in my d35, so i'll have one left over

 

[geck0]

actually that would work out great! i'm in the middle of rebuilding my a4ld at work so my truck is down for another week or two anyway. So yea if you get it off just let me know and i'll paypal ya some cash if yours are good!

 

[88_Eddie]

sure thing man, i'll get one of those if it fits it ships boxes and you can just have it for shipping. maybe this will motivate me to get some stuff done on it lol

 

[geck0]

yea that's how i was for a while but now that i am almost done the trans i've gotten my fire back! btw thanks!

 

[geck0]

Eddie! Any luck yet on your project i'm ahead of schedule!

 

[88_Eddie]

hopefully next weekend, i had to get it towed to the shop to get a timing bug fixed. not sure when i'll get it back. i'll let you know ASAP.

i'd poke around the classifieds section tho, someone may have one there

 

[Boggin]

i have a full diff im sure i could get one out of but if eddie cant get it let me know

 

[geck0]

so after all this.. i ordered one from LMC and got it... IT WAS MADE COMPLETELY WRONG wrong lengths on both sides, the 16x 2.0 side was cut at 5/8 X 11 and was way too long... so i'm back to does anyone have one AND CAN get it to me ASAP~! thanks in advance!

 

[disciplerocks]

Is there not a u-pull near you? Thats the first place I would have went.