Did I screw up bad?

[fourwheelford]

Hey everyone quick question, I seafoamed my intake with the spray can not the liquid about a month and a half ago I only used about half the can and followed the directions on the can but stupid me didn't know that I had to change the oil and drove the truck for another 800 miles or so before I did the timing chain and changed it then. Do you guys think I did any serious damage to my motor? Its a 2000 ranger with 100,000 miles and the 3.0 flex motor, thanks for any advice.

 

[Beanmachine7000]

Not at all... You don't have to change your oil (it says on the can you can put the stuff directly into your crankcase)....

 

[fourwheelford]

Whew load off my mind Thanks much it seems like I always screw things up more when I try to fix them

 

[Rifleman]

The oil change is only for if you use it in the crankcase.

 

[Beanmachine7000]

The oil change is only for if you use it in the crankcase.

+1... But, if you do that I'd run it for a few miles to help loosen up what is in there... BTW - If you have enough Seafoam getting into your crankcase by doing the vaccuum method that you need to change your oil after you do it you have a problem Seafoam won't fix

 

[fourwheelford]

Thats what I thought but I was thinking the only way would be leak down, thanks again everybody for throwing your knowlage at me