Welcome Visitor! Please take a few seconds and 
Ok. I finished the tranny rebuild and got the bii all back together. All the tranny stuff went back in great! Had to replace battery cables to get it to start:/ The shifting is very loose. Loose in all gears. But dosent fall out of gear. I'm thinking I need to replace the bushing on the shifter? Or the spring on the inside of the tranny (FM145)
Dorve fine for the 50 miles to its new home. When I shut it off the cap blew on the radiator. I'm thinking because it drove for so long after not being started/driven for almost 2 months. Any other ideas on that? I'm gonna bleed the clutch again, its acting funny, abd the clutch and slave will be a year old this december, but I'm not ruling that out.
Any suggestions? Ill get some pics soon
Dorve fine for the 50 miles to its new home. When I shut it off the cap blew on the radiator. I'm thinking because it drove for so long after not being started/driven for almost 2 months. Any other ideas on that? I'm gonna bleed the clutch again, its acting funny, abd the clutch and slave will be a year old this december, but I'm not ruling that out.
Any suggestions? Ill get some pics soon
