d44 axles

[diablo]

I have recently gotten a d44 however I still need everything from the steering knuckles out.. Does anyone know if I can bolt up a set of knuckles off of an f-150 ttb.

 

[wahlstrom1]

The knuckles on a ttb d44, from everything I've been told, have a different vertical ball joint spacing then those on a solid d44. However, everything from the knuckle out, spindle/rotor/calipers etc is interchangeable.

-andrew

 

[diablo]

Thanx

 

[mhughes165]

if u want the most heavy duty setup u can get ur hands on put some chebbie outers on it, knuckle and all, ull have yourself a 8 lug ranger

 

[AKBroncoII]

The spindles are NOT the same. The hubs, bearings and calipers are the same. The spindles will not work.