cut and turn

[C130MARINE]

Hey whats up? I got done doing a 3"cut and turn on my 1991 dana 35. It all worked out great. Truck has 8" skyjacker coils and a 1 inch spacer under the spring...and it aligned with no trouble using a 4" drop bracket. My question is the front right side shaft that goes from the differential to the hub....how much inward/outward free play should that have. Mine moves what seems alot but i cant remember if thast he way it was originally....any help or insight would be appreciated guys!!

Dale

 

[dirtraider]

front suspension sounds SWEET have any pictures?

 

[-ROKTOY-]

More information, and PICTURES??

 

[slammer67]

I'd be interested in seeing some pics too, especially the jig you used to turn the beams.
I'll be trying a cut/turn also after I SAS my ranger, I'm going to do a cut/turn on the d35 and put it in my dad's B2.

 

[canyoncritter]

where did you cut at....did you kick out the bj or cut them and angle them

 

[C130MARINE]

sorry gents....i havent been back here in a while...my thumbdrive i missing and i had all the pics on there. I will get it back and then post away. Its actually pretty simple. Just scarey never having played around with 4x4' before. But once it was done...it was pretty easy! I did a 3" cut and turn. worked out great. Again, i will have to find the thumbdrive!!!

Dale