Cruise Control Lights

[aaron_ariens]

Okay, I have posted this before, but too little response.

On my 01 ranger, the cruise control buttons are on the steering wheel.

The left side ON/OFF lights up, along with my other dash lights, and the right side, RSM/SET ACCEL/COAST does not light up.

How would I do about fixing this? Please let me know, thanks, Aaron. =]

 

[OldJunk]

Go back to your first post, I answered there.

 

[aaron_ariens]

Oh. My bad. I'll look at that. Lol.

 

[Earl43P]

http://www.generation-edge.info/topic.asp?TOPIC_ID=110

 

[aaron_ariens]

So, I guess just do everything up-intell changing out for the LEDs and, just replace the bulbs.

Oh, in one part it says "There are small plastic tabs that retain the circuit boards in the hard plastic bottom part of the pods. These will break during disassembly, do not worry, as they will not be needed."

Is this still true if I am not adding the led?

 

[OldJunk]

Never had any prob. w/ anything breaking, really pretty simple job. You can look for the whole switch assy., but i found them to be either destroyed by wrecking yard or already burned out. as i said before if you decide not to do the LED route, i have several extra OEM bulbs.

 

[aaron_ariens]

Never had any prob. w/ anything breaking, really pretty simple job. You can look for the whole switch assy., but i found them to be either destroyed by wrecking yard or already burned out. as i said before if you decide not to do the LED route, i have several extra OEM bulbs.

I don't want LED. Stock is good for me. =]

How could I get some bulbs from you, and...how much?

 

[OldJunk]

I will check in my supply/ stash of elect. parts tomorrow after work and then PM you, cant get there tonight. no problem getting them tomorrow.

 

[aaron_ariens]

I will check in my supply/ stash of elect. parts tomorrow after work and then PM you, cant get there tonight. no problem getting them tomorrow.

Okay. Just let me know. Thanks. =]]