Welcome Visitor! Please take a few seconds and Mrnicks
Active Member
- Joined
- Sep 13, 2007
- Messages
- 35
- Vehicle Year
- 99" Ranger 4.0L
- Transmission
- Automatic
I wasn't really sure where to post this. So if you search for core support or radiator support I guess you'll find it. I just figured I throw my pic up here for others to see and ask question if need be. Job took 11 hours total and it wasn't that bad.
https://plus.google.com/photos/1024...ms/5710841394077813681?authkey=CJLm7sLxvpGgSA
Tools needed (or at least what I used.)
Grinder with cut off wheel
Small 110 stick welder with 6013 rod
drill with drill bits
screw drivers
1/2"electric impact with 18mm socket
wrenches
pry bars
electric impact driver
various sockets and socket wrench (used a lot of 1/4" drive)
vise grips
PB BLASTER!
needle nose
and probably a few other misc tools and surprisingly no torches!
https://plus.google.com/photos/1024...ms/5710841394077813681?authkey=CJLm7sLxvpGgSA
Tools needed (or at least what I used.)
Grinder with cut off wheel
Small 110 stick welder with 6013 rod
drill with drill bits
screw drivers
1/2"electric impact with 18mm socket
wrenches
pry bars
electric impact driver
various sockets and socket wrench (used a lot of 1/4" drive)
vise grips
PB BLASTER!
needle nose
and probably a few other misc tools and surprisingly no torches!
