cooling questions on v8 swap

[RangerFabWorks]

ok, so my 350 is very mild. i bought a 28x16.5 aluminum universal rad from jegs. heres the spec page http://www.jegs.com/i/JEGS/555/52000/10002/-1?parentProductId=752961

i will have a trans cooler on the front of this. and im running an electric fan as a puller on the back of the rad.

will i have any problems cooling my v8?

this was the only size they sold that had the height i needed.

thanks

 

[originalnitro]

You should be fine. I'm running a griffin 31x16 it has no problem keeping my 347 cool.

 

[RangerSVT]

What size and CFM is your fan, if you can't get air across the coils to cool the coolant down, it doesn't matter how big your radiator is, there are a few of us using the stock 4.0L radiator and not having problems...
SVT

 

[RangerFabWorks]

I'll check on the fan. It's a stock 91 suburban with the 5.7. So I think it should be good. Ill check it out.

 

[COPPERHEAD85]

A shroud for the fan helps bigtime.

 

[chvlfrk]

>>>

Mines a Griffin 4 core and it runs 190* consistently..............