coolent lines/belt length 5.0

[alaskan155]

was looking at my 5.0 yesterday and i was trying to figure out how the heater core/intake lines are hooked up for the coolent.

the water pump has 2 hookups for coolant lines, the intake has 2, (figured out where top one hooked into lower manifold), the manifold has 2(found where 1 hooked at), and the heater core as 2 coming from the firewall

so if anyone has a picture of a stock f150 setup i would be mutchly apprecciated.


as for the belt, wondering what the length is for a stock 91 f150 serpintine setup,with out the smog pump is.

thankyou

 

[v-8power]

I have a 96 i can take some pics of for ya. Not sure if this will help

 

[alaskan155]

it help, thank you, i see the 1 heater core hose T's and feeds the top of the TB, then goes to the water pump, but my ? is where does the other outlet go on the water pump?

 

[mudnsnow]

For the belt lenght, just take a wire and install it like your belt and measure it. By memor, it's something like 89 inch without the air pump. Here is the part number from NAPA 060882