coil spacers

[509lifted]

ok guys i just wanted to make sure first b4 i go and make them... if i only do 1 1/2 inch i dont have to get drop brackets right? i just wanna clear a little bit bigger of a tire.

 

[4x4junkie]

1½" spacers = 2¼" lift. Might be pushing it pretty close, but it's possible it may work.

To be a little on the safer side, I'd go with 1¼" thick spacers.

 

[509lifted]

thanks i didnt know that i thought it was the same amount of lift as the coil spacer is that hels me alot.

 

[94xlt4.0]

you also need to remember the coils have probably sagged quite a bit if they are still original. with the 1½" spacers you will most likely be fine still. i have 2 inch spacers and was still alignable

 

[509lifted]

ok so come to find out the guy that was gonna make them for me doesnt know how so if someone could help me out on how to meke them i would appreciate it

 

[sirfunkeybut]

stacked washers welded?

 

[Maniac]

i put 2 inch coil spacers on mine and neededdrop brackets cuz the frontend was too outta wack to get aligned

 

[509lifted]

the only problem im haveing sirfunky is what size do i use as in size around

 

[4x4junkie]

1-3/8" I.D., 3 - 3-1/2" O.D.

http://www.therangerstation.com/tech_library/WasherCoilSpacers.htm

 

[509lifted]

thamk you 4x4 that helped alot