• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

carrier questions


MichiganLarry

Well-Known Member
Joined
Jul 1, 2008
Messages
115
Age
68
Vehicle Year
1989 Ranger 4wd
Transmission
Automatic
We swapped into my sons ranger an axle out of an 88 4wd ranger. The code on the door jamb was F7 indicating it is a 7.5 with 4.10 gears. I checked the ratio by turning the input shaft until it turned one of the axles shafts two revolutions and it took just over 4 turns. Seems like 4.10 to me. Next I popped the diff cover to see what was inside and it appears to be some sort of traction device. There were small round springs visible on one end of the carrier and S shaped clips between the planetary gears. Any idea what this is?
 
Looks like a trac loc from what I found in the "READ THIS FIRST" post - duh!!
 
stock ford 7.5 limited slip setup came in some rangers and the Eddie Bauer B2'S had them i have one sitting in my front seat right now.
 
Hmmm, maybe i should go to the wreckers and find an f7 to replace my 87 rear diff...... lsd sounds better then open.


Ry
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top