Camber kit/Camber bolt

[PRanger]

Ok so just got some new shoes and the shop mentioned they couldn't put my alignment in spec because there was no more thread on the camber bolt(drivers side.) They told me I needed a camber kit. Now do I need to buy the kit and bushings or can I reuse the bushings? Is there any good how to on this? I have been told it is easy, just unbolt and slide new bolt in, but I've just never done it

 

[Jed1992]

Part Camber/caster

http://www.superlift.com/accessories/fordttb-bushings.asp

http://superlift.com/Catalog.asp?P=K687&V=254

Good info here about the camber & Caster - for my 1992Ranger it was part #'s on the first link above - You'll need to call for this part mine was out of stock at the time took a few weeks to come in. Go to an old school Aligment shop to have this done they will need the caster/camber chart that comes with it to dial it in right.

Hope that helps,

JED

 

[PRanger]

Thanks for the response but I have a 98 so ours are very different.
I have the moog part number

Moog #k80065 is the camber bolts
Moog #k8704 is the upper control bushings.

So I am guessing I need both