cam help

[sbffan]

I'm building a 302 for my street.strip 1988 ranger. I'm looking for a hydraulic roller cam. Here is my build. 030,forged pistons, 10.5 to 1 comp, ported large valve heads, performer rpm intake, 650 Holley, 1 5/8 to 3 inch long tube headers, c4 trans w/ 3000 stall and 4.11 gears and 26x10 inch slicks. I have an x303 cam but was told there are better ones out there. Thanks for the help! Jim

 

[dangerranger83]

I would give comp cams a call, they may be able to help you find and build exactly what you are looking for since you have all the information about your setup at hand.

Sent from my rooted SPH-D710 using Tapatalk 2

 

[blk93notch]

I've ran the e and f can from ford motorsports. I honestly liked the e better for street. F was great also . For street and strip I would go f. The x cam would be good for a strip truck