• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Brand New front hub banging loudly


BustedKnuckles

10+ Year Member

Joined
Aug 18, 2012
Messages
1
Points
1,501
City
Columbus Ohio
Vehicle Year
2000
Transmission
Manual
so this is my first post on the ranger station!

i recently bought a 2000 ford ranger sport 3.0L 4x4

when i bought it the front drivers side wheel bearing/hub assembly had completely failed (i had to have it towed) and the front drive shaft was also taken off (needed rebuilt) :icon_welder:
i got it back in my garage and put a brand new hub assembly in. i purchased the non-vacuum hub (i think its what it takes) and installed it. porblem solved, it drove like a champ :headbang: (in 2WD that is...)
today i rebuilt the whole front drive shaft (CV & U-joint) and installed it. for the first time i engaged the 4x4. as soon as i started moving the front driver side hub started banging loudly, it shook the truck and sounded terrible. :icon_confused::bawling:

obviously there is some issue with the hub. i'm not sure where to start though. if i installed it wrong, wouldn't the truck drive funny? a little advice and maybe some ideas would be great! :icon_thumby:
Thanks fellas!

~Nate :icon_cheers:
 
so this is my first post on the ranger station!

i recently bought a 2000 ford ranger sport 3.0L 4x4

when i bought it the front drivers side wheel bearing/hub assembly had completely failed (i had to have it towed) and the front drive shaft was also taken off (needed rebuilt) :icon_welder:
i got it back in my garage and put a brand new hub assembly in. i purchased the non-vacuum hub (i think its what it takes) and installed it. porblem solved, it drove like a champ :headbang: (in 2WD that is...)
today i rebuilt the whole front drive shaft (CV & U-joint) and installed it. for the first time i engaged the 4x4. as soon as i started moving the front driver side hub started banging loudly, it shook the truck and sounded terrible. :icon_confused::bawling:

obviously there is some issue with the hub. i'm not sure where to start though. if i installed it wrong, wouldn't the truck drive funny? a little advice and maybe some ideas would be great! :icon_thumby:
Thanks fellas!

~Nate :icon_cheers:
 
I'm new to the forum too. I know your thread is old but would like to know what the problem was, I'm having the same issue and can't seem to figure it out. aAny help would be appreciated. Thanks
 
@pickupman55

Why don't you create a new thread with your symptoms and what you've already done.

This thread had no reply and that member has never been back.
 

Sponsored Ad


Sponsored Ad

Event Coverage

Events TRS Was At This Year

TRS Events

Member & Vendor Upgrades

Become a Supporting Member:

Or a Supporting Vendor:

Latest posts

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

TRS Merch

Follow TRS On Instagram

TRS Ranger Sponsors


Sponsored Ad


Sponsored Ad


Product Suggestions

Back
Top