Brake Lights Stuck ON Help

[1986B24x4]

I am having a problem with my brake lights and need some help. I have replaced the bulbs but that was not my problem. When I drive during the day they work fine but when I turn my lights on at night the tail light on the drivers side is a lot brighter than the other and when I push on the brake it doesnt change. It acts like the drivers side tail light is "engaged". Is there a brake switch or something I can replace to help this problem? I am at a loss. Any help would be appreciated. Thanks!

 

[alwaysFlOoReD]

With these types of problems it is probably bad ground/s. Clean sockets and bulb bases and any other grounds you can find or think of.
Good luck,

Richard

 

[1986B24x4]

Bulbs are less than 24 hrs old. The sockets are pretty packed full of grease (from the previous owner). Would too much bulb grease keep it from getting a good ground? Especially if it was kinda old and hardened up a lil bit? I guess I will try cleaning all the grease out of the sockets, check my grounds and go from there. Anyone else feel free to chime in. Thanks.

 

[1986B24x4]

Fixed it! Thanks for the help!