body lift question

[s2pidyeah]

for a 92'regular cab,long bed,.... is it easy to install a body lift?
and where can i get new body mounts bcuz i only ordered just the lift spacers

 

[Sunk]

You'll need a large Torx bit, T45 or T55, a high lift or some type jack, sockets, and an afternoon or weekend depending on your skills and the amount of rust and other issues oou could potentially run into.

 

[Boggin]

all i used was a thumb wrench and a 3/4" socket and 2 jacks and a chain hoist

 

[s2pidyeah]

You'll need a large Torx bit, T45 or T55, a high lift or some type jack, sockets, and an afternoon or weekend depending on your skills and the amount of rust and other issues oou could potentially run into.

should i use floor jacks or a lift

 

[koda6966]

Do you really need jacks? I'm guessing that's to take the cab off. How much would you say the cab weighs?

 

[Sunk]

If you have access to a lift, then yeah, I'd use it. Just undo all the bolts at once and lift it up enough to get in there.

I can't imagine you'd be able to lift a corner of the bed, and be able to get under there to but the block in, much less the cab. But maybe if you're Hercules.

 

[koda6966]

But maybe if you're Hercules.

Or you could just get a few people and pick it up entirely?