Body lift help

[gearjmr]

So i recently purchased a 3"PA body lift for my 85 b2. i spent a few days sprayin the bolts down with WD40 and spent a few hours bustin loose the nuts.
as i was liftin the driver side i got 2 outta the three blocks on when i noticed that the rear part of the body wasnt lifting. so under further examination i realized that i missed the back two bolts.....well DUH!!.
so does anyone know of a way to get these damn things off besides dropping the skid plate and fuel tank?
thanks guys

 

[Little_blue_B2]

Sorry I really couldn't tell you but I have the same truck and I would really to see some before and after pics of it. And what size tires will you be running?

 

[pangborn83]

you can get the bolts out by pulling the rear carpet out and taking the plates that cover the bolts off I had a friend use a box end he just held it up while I hit it with an impact and he let it wedge against the frame for a hold back.

 

[Broncotim]

I unfortunatly had to remove the skid plate and gas tank! Then they would not break loose so out came the air cut off tool.