- Joined
- Sep 27, 2008
- Messages
- 495
- Points
- 3,101
- City
- Twinsburg, OH
- Vehicle Year
- 1988
- Transmission
- Manual
Hey guys the heat and AC have always worked great in my 97' Ranger on all 4 speeds. I even used the AC about a month ago and everything was fine. Well last night i went to turn to heat on to defrost my windshield and nothing..i don't have any air coming out in any position on any speed. I can hear my AC compressor working when i have the switch set to AC or one of the setting where it runs when the heat is on, but no air blows at all. I checked the fuse in the inside fuse box and it was fine. If i check the blower motor with a constant 12v and it works, what else could be my problem? Thanks!