BL, 33's, wheels, installed (pics)

[dbp]

Front:

Rear:

Side: (looks kinda bad because the rear bumper was not put back on when I took the pic).

--

All in all, took about 8 hours to do...By no means would I consider that an easy job...and the pictures in the PA instructions are pretty bad.

I had to get 4 bolts, 8 washers, and 4 nuts because I couldn't find any in the kit to put the rear bumper back into place...but the brackets that the kit came with relocated everything nicely.

 

[dbp]

Oh yeah...any tips on the manual tranny shift lever...when the console is installed and the boot is put in place, it hits the console trying to get into 2nd...so I just have the boot sitting on top of the rear part of the console.

Only thing I can think of is notching it out or something right where 2nd is. Not that you can tell how I have it...looks like it's in place.

 

[86 slo-vo]

did you use the extension?

 

[dbp]

Yeah I used the correct extension. Put it like this...if the boot was removed, and you watched the shifter lever, it would come probably 1/8" close to the console. With the boot in, it hits. It will still go into second, but I could see myself cruising along, lazily shifting into 2 and grinding my gears. I think I'm just going to either leave it or notch that plastic console part right there out just a little.

 

[corrond56]

I like your tires. the look familiar