Behemoth 4x4 Electric to Manual Shift Conversion Kit

[johndeereagtech]

Borg Warner Electric to Manual Shift Conversion Kit

Electric Motors Love to Fail: It’s frustrating and expensive to have your electric motor fail on your Borg Warner transfer case when you really need 4WD. Get rid of that faulty electric shift motor and bolt on our cable shift conversion kit to get full manual control of your Borg Warner...

behemothdrivetrain.com

Lots of videos out there on installing it to the transfer case, no info or pics on the shift lever installed to the floor.

Anyone done this? If I am going to do it I want it to look factory.

 

[Uncle Gump]

I'm gonna guess and say the price scares most away.

Can't say I've ever seen one installed here at TRS.

 

[don4331]

The original company went under in 2020; this might be a new iteration of the same crew.

 

[johndeereagtech]

I reached out to them for more info. Does it come with shift boot and provisions for floor mounting, etc. I will report back my findings.

 

[Cblev323]

I reached out to them for more info. Does it come with shift boot and provisions for floor mounting, etc. I will report back my findings.

Any updates on this

 

[johndeereagtech]

Any updates on this

They did respond, no boot or no bracket. It's a total custom install. If you want it to look factory you might try and find 98 and down floor shift console and boot for the trans and tcase. They are tricky to come by. That would be my plan should I proceed with this. I watch eBay constantly for 98- manual tcase boot/bezels. Keep in mind there is a removeable floor plate underneath for shift lever, if you had the manual tcase plate it would make things even easier otherwise youll need to cut your existing floor plate. Not rocket science but the right parts make all the difference.

 

[4x4prepper]

Though a tad pricer, it is basically a one off build since I doubt they sell more then a dozen in a year. If I had a newer Ranger I would probably go for it, since it looks bullet proof. Their other transfer case offerings look nice too.

 

[Cblev323]

Though a tad pricer, it is basically a one off build since I doubt they sell more then a dozen in a year. If I had a newer Ranger I would probably go for it, since it looks bullet proof. Their other transfer case offerings look nice too.

It looks to be of good quality. Just a little on the pricey side

 

[Shran]

I believe there is another company out there building something similar but now I can't find it.

Just FYI Behemoth Drivetrain has a horrible reputation that they have earned by not delivering things that they allegedly sell. I would advise anyone to look through the million threads on Pirate about their frustrated customers and then make an educated decision about how to spend your money. Even if they are under new ownership, they have a LOT to make up for.

 

[North Idaho 5.oh]

I just picked one of these up at the junk yard of all places!