axle pivot bolts

[maroon ranger]

I have looked every where and I just for the life of me can't figure this out!!!!! But what are the size and grade (or metric) of the two axle pivot bolts? And also the bolts/studs that connect the radius arms to the front axles? And on the bushing side of the radius arms, is that a 3/4 inch stover nut?

 

[Sunk]

I can't help you on the pivot bolts, but I'm pretty sure the radius arm nuts are 1 1/8".

 

[4x4junkie]

Yes, stover nuts (nylocks can be used as well).

The pivot bolts are 14mm (sorry I don't have the length). 9/16" bolts can be substituted.
Axle-to-arm bolts are 3/4" SAE (D35).

 

[maroon ranger]

O.K. thanx!!! Are those axle pivot bolts only threaded on the ends or threaded all the way? And would I use washers on the nut side of the pivot bolts or both sides?

 

[4x4junkie]

No, they don't have to be threaded all the way.

I used washers on both sides on mine.