Automatic hubs gen1 bronco 2 and how to get them apart.

[Project88]

If your ever feeling froggy and/or ignorant enough to do what I did. Just know it's not worth the time. Took my good working automatic hubs off my bronco 2 and pulled one apart a good working automatic hub is Sitting in pieces at my work cause I thought I was smart enough to get it back together come to find out spring tension is a pain and lack of clearance is a pain when trying to get lockings put back in place. So has anyone ever pulled apart the actual automatic hub to clean and regrease and if so how'd you get it back together?

 

[85_Ranger4x4]

Some pertinent information for you here:

Ford Ranger 4x4 Locking Hub Troubleshooting - The Ranger Station

Is the 4WD not working in your older Ford Ranger? Try this Ford Ranger 4x4 Locking Hub Troubleshooting procedure.

www.therangerstation.com

There is more for automatic hubs towards the bottom.

I have never been around them in real life so I can't comment further. I converted my axle to manual hubs before I swapped it into my truck.