Anyone with a spare DIS front seal housing?

[scotts90ranger]

I NEED one bad as I had to destroy the one on my engine from a timing belt pulley that was STUCK REALLY BAD, taking one out of a junkyard engine is the next option but that's an iffy scenario if the crank pulley is stuck on the engine I pick... kinda a PITA if I can't get what I need...

Anything form '89 to '95 should work, I don't know if they used the same housing on the EDIS engines but I need it to work with the aluminum oil pan and have clearance for the crank sensor.

I would have posted in the wanted area but thought this would get more 2.3L junkie traffic... , I know I have a bunch of spare parts floating around but never look in the classifieds or wanted area...

 

[scotts90ranger]

Anyone? Guess I'm going to the junk yard this weekend...

If I haven't heard anything because my PM box is full, sorry, use the email link if you click on my username...

 

[Mikel89us]

I might have one, i will go and look today, its out of an 88 or so ranger 4x4, so its not past 90 i think, or 89, when ever they quit making 4x4 4 cyl rangers.

 

[scotts90ranger]

they quit making 4x4 2.3L Rangers in '96 or '97, but they were much more common in the older years... I need it to be from an engine with DIS (Distributorless Ignition System) to have clearance for the crank sensor (I think that's '89-94), when they changed to EDIS they moved the crank sensor to mount on the front seal housing I think so I don't think those will work...

Thanks for looking! If you don't have one, no biggie, I kinda need to go to the junk yard anyway...

 

[Mikel89us]

I do have one, i will have to take it off. Email me MikeL89us@yahoo.com, we will get the specifics worked out!

 

[scotts90ranger]

Sweet! email sent...