anyone have a tranmission wireing chart for a

[pittman4]

a 87 ford bronco 2 2.9 5 speed trans (standard)? any help would be great on what plugs go where on the transmission just purchased it and it didn't have a trans in it

thanks

 

[Explorin94]

The plugs are specific to where they go. You shouldn't have any problems putting the wires where they need to be, unless youare putting a different trans in.

 

[pittman4]

ok their are alot of loose plugs that are not pluged in and they go nowhere so i just wanted to see if anyone had a chart

 

[Jspafford]

There should only be 2 plugs that go into the transmission. One for the backup light and one for the neutral sense switch.

 

[pittman4]

i have one thats on the side and a plug with wires on top and one plug on the drivers side of the trans

 

[Hahnsb2]

1 plug on top, one on the passenger side and there will be one on top drivers side of the transfer case.

 

[metalmacguyver]

The majority of connectors through out the vehicle are designed to be unique so that they dont get mixed up.

 

[pittman4]

thats guys but to let you all know their are 2 different plugs that will go into the side of the trans one will let you put the truck in gear the other will not after cranking

 

[Jspafford]

If it's a stick NONE of the sensors will prevent it from going into gear running or not.