access panel?

[jonsranger]

I did a quick search but I didn't find exactly what I was looking for. So my sisters 98 Explorer sport 4.0 vin x, is not getting any fuel pressure at the rail, and I don't hear the pump come on when I turn the key. I checked the fuses and the relay, they are good. Is there anything else i can check that will cause the pump not to come on?

The main question I have is if there is an access panel under the drivers side rear seat. There is a piece of plastic under the carpet, and I don't want to tear everything apart only to find no panel to access the fuel pump. So any input would be appreciated.

Thanks,
Jon

 

[4.0B2]

could check the power at the top of the tank? or the wiring at the framerail, right before the tank..
can't help anymore than that... i know nothing of explorers that new..

 

[Robert_1967]

look in the hand book, and find where the inertia switch is that is inline with the fuel pump, it could have kicked out.




Robert

 

[geck0]

same thing on my bronco II it was the inertia switch, un plug it and run a jumper wire over the connector then try starting