98 - 01 Conversion

[BMARTIN87]

Hey i just wanted to know what all i would need to update my front end to a 2001? i have a 1998 ranger now.... let me know if anything is wrong



header panel
lights
grill
bumper brackets
bumper

Thanks!

 

[aaron_ariens]

Idk, but.. the 200t tail lights will screw right in. =]

 

[wvcat]

valance & fogs if needed

 

[dogboy]

I'm not sure if doing the swap form a 98 to a 01 would be much different than a 93-97 to 01+, but I know for a 93 to 01+ you need the hood and fenders too.

 

[Fx4wannabe01]

98+ fenders are all the same.

You can run your stock hood...it's the same hood as on 01-03 XL and XLT 2wd's.


You'll need the headlamp retaining sliders. misc j-nuts and screws for proper fit.

01-03 header panel.
01+ headlamps
01+ corner lamps
01-03 Grille(4x4 or edge honeycomb or 2wd bars)
01+ headlamp retaining sliders
Autozone EP27 electronic flasher(so you can just unhook that extra signal bulb w/o having hyperflash)
Misc Jnuts and screws.



For the bumper....believe all you need is...

01-05 Upper Bumper(4x4/EDGE or 2wd)
01-03 Lower Valence(Round fogs, 4x4 grey plastic or smooth EDGE paintable)
01-05 outer bumper supports.
01-03 Fogs(if you want the round fogs and if you want fogs at all)

Center mounts should be the same.