Hi all have 94 extended cab with a 3.0 and a A4LD that won't shift to second in drive. I can shift it manually and it shifts fine. Any ideas what my issue is? Thanks in advance
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
94 A4LD won't shift to second
- Thread starter Bluemissile
- Start date
- Joined
- Mar 6, 2020
- Messages
- 1,923
- Points
- 601
- City
- 48022
- State - Country
- MI - USA
- Vehicle Year
- 1994
- Vehicle
- Ford Ranger
- Engine
- 4.0 V6
- Transmission
- Automatic
- Total Lift
- 1-1/2 inch front leveling
- Total Drop
- Stock
- Tire Size
- 31/10.50/15
- My credo
- What's the worst that could happen?
Mileage?
Have the bands ever been adjusted?
Is the trans fluid up to level?
Has the trans fluid and filter ever been changed?
Transmission Modulator Valve connected? This could be the cause.
Have the bands ever been adjusted?
Is the trans fluid up to level?
Has the trans fluid and filter ever been changed?
Transmission Modulator Valve connected? This could be the cause.
Has 145000 miles on it. As far as I know the bands have not been touched. Fresh fluid and filter change. Fluid was dirty not burned and absolutely no metal in the pan. Good vacuum to the modulator.
Sponsored Ad
Sponsored Ad
Special Events
TRS Events
Member & Vendor Upgrades
Become a Supporting Member:
Or a Supporting Vendor:
Recently Featured
TRS Latest Video
TRS Merchandise
Follow TRS On Instagram
