93 Ranger 4.0 4x4, XLT - rotor removal

[montydaweasel]

I am trying to replace the rotors on my 93 4.0L 4x4 5-spd with manual locking hubs. I got the hub wrench, and I loosened the first nut, but behind it there is a single washer and then another 4-prong nut. I am stumped. Please advise how to get the rotor off without destroying the wheel bushings?

 

[mht95ranger]

You need to pull the washer and other nut off to get the rotor off.

 

[Jspafford]

Yep... The washer should pull off, and then there is a second almost identical nut behind it that should only be about finger tight. The inner nut has a small nipple on it... MAKE SURE you take note of this, as it locks into the middle washer upon reinstall!!!!

Good luck!