93' Navajo

[Slingblade]

Thought I would put the finished truck on the front page.

basically this is going to be a suspension swap from my 93' ranger

so here is what i accomplished tonight after work

got the axle and all the stock brackets out of the way. Now I need to get the axle and suspension out of the ranger to transplant it.

I thought I would roll one of the tires under it to see what it will look like.

The truck should sit about 3-4 inches higher when the suspension is under it.

 

[Kyle M.]

Sweet! SO whats the plan? Why the parts from the truck?

 

[Slingblade]

Sweet! SO whats the plan? Why the parts from the truck?

Well now I have a wife and a 2 year old and it won't be long until I'm going to need a back seat for wheelin with the little one.

Ok now here is what I got done tonight.

I got the ranger striped of its front suspension and axle.

And here is what I got harvested to put on the Navajo.

So hopefully tommorow I will get time to start putting some of this stuff back together.

 

[Slingblade]

now its time for a progress report, been a little to busy to post lately but I found some time.

Got the front end done woot

 

[RacinNdrummin]

Hey Man, you should do the blinker mod to the side markers and get rid of those little blinkers. I just did it to my Navajo frontend on my B2 and it works great! Took all of 20 minutes to do.

 

[Slingblade]

almost done, when i first put the rear axle under the Navajo, I decided to try using the 2.5" blocks but soon discovered that the rear was then 3in taller than the front. Pulled the blocks out and got new u-bolts and here is how it turned out. I just need to make an upper shock mount crossmember to use my skyjacker shocks.

 

[Slingblade]

Trucks been done for a couple weeks just haven't had time to post up pics yet.

Now I just need to upload the pics from the breakin weekend.

Chris

 

[Kyle M.]

Looks good!