88 ranger cowl induction hoods???????

[fordman4x492]

ok guys i cant seem to find a cowl induction hood for my 88 ranger. can any one help me out????

 

[adsm08]

I've been looking for one for a while. If you find one, let me in on the secret.

 

[fordman4x492]

I've been looking for one for a while. If you find one, let me in on the secret.

can do.

 

[RustedRanger]

Learn how to lay fiberglass and make one, it's not too hard. I don't mean the whole hood just the scoop. I have made things before using cardboard as a start and just laying the fiberglass over it. I even thought about using balsa wood or coat hanger as a form. Whatever you lay the 'glass over becomes a part of the thing your making if it is porous and will soak up the resin or it can be ground out and a layer put in its place once the outside is done. If you have never used fiberglass resin be sure to get a can of acetone....that's pretty much the only thing that will clean it up and get it off your hands. I know it soaks through the skin and it's not good for you but neither is the hardener for the resin.

 

[superdave1984]

Get some styrofoam and make the form. Easy to cut and shape however you want. Then cover it with aluminum foil so the fiberglass won't melt it.

 

[TheBeast]

Just buy a prefabbed cowl section from summit racing. Then lay it on with epoxy and fiberglass it on