88, 5.0, 302 convert to carb?

[Carlos Murphy]

Off hand, anybody know what parts I need to convert to a 4 barrel.

1964 1/2 Mustang project with a 1988 5.0, 302 has no computer or harness.

Want to do this O'l school easy way.

 

[85_Ranger4x4]

Intake, dizzy and plug the secondary air injection ports in the back of the heads with big bolts.

I converted an '87, Duraspark ignition with a steel geared dizzy, Weiand Stealth 8020 intake and Edelbrock 1403 500cfm carburator. Goes great.

 

[Carlos Murphy]

Conversion

So far on my list is:

Jrg's #15913 electric fuel pump, $69.95

Edelbrock #1406 Performer carb, $299.99

Edelbrock #2121 Performer manifold, $163.99

Still checking on linkage, distributor and a semi hot cam.

Thanks for the help.

Chuck

 

[deathbypsi]

If its a Mustang 5.0 HO with a roller cam just go to a parts store and order na distributor for a 1985 Mustang GT 5.0 5speed. That will be the cheapest steel geared distributor you can find to work with a carb. Pick up a used MSD 6 box and used B303 cam for a nice cheap setup.

 

[doorgunner]

you probably already know that the lectric fuel pump should be limited to around 6psi (to keep from burning your car down)

I did the carb/intake/distributor thing to my '36....piece of cake!